MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - Standard or roller rockers

I recently purchased a head that did not have a rocker assemly. I run a stock engine but will be adding a supercharger this Spring so I was considering updating the head while I was in there.

When I looked at the price of buying pieces to make up a rocker assembly I was wondering if a roller rocker would be more cost effective and efficient.

I am currently helping a vintage racer restore his Mini engine and he uses these roller rockers in all his racers.

Do you have any experience on this upgrade or change from OEM. Also could you offer any source for these roller rockers.

Thanks

Joe
I
JWP Policastro

See http://www.ttalk.info/Fanelli.htm Bud
Bud Krueger

I haves rd of and know a source for roller tappets, I have never seen roller rockers for XPAG blocks discussed. Regards, tom
tm peterson

Thanks Bud, yes I have them in stock.
Len Fanelli

Thanks Bud I am going to call Len after I finish this.

By the way my fuel pump is working flawless.

Joe
JWP Policastro

Here is a photo


Len Fanelli

Talked with Len yesterday afternoon. Really a informative conversation.

Hear is what I learned. I was expecting the roller rocker to be a complete unit like the one on my friends Mini. Len informed me I still needed a shaft, pedestals, etc. Because of this it did not make economic sense to just buy the roller urockers. In addition, Len told me other then reliability there was no power advantage to them with a standard engine.

In this investigation I did come across a good analogy of a upgraded cam and roller rockers and a supercharger. Think of a TD with a supercharger as a V8 and a cam conversion as a 4 cylinder with a turbo charger. In a V8 power is closely distributed over the normal power band and a turbo which knicks in at a specific rpm range.

For me this helped me understand the difference without actually driving both.

Joe
JWP Policastro

There is no comparison between a hot cam and a supercharger. The supercharger give huge improvements in torque across the entire range, whereas the more power a cam gives, the narrower the RPM range gets. And equally upgraded, a normally aspirated engine will never give the power of a blower.

I have roller rockers on one car, an MGB. The only reason I went with them is that I needed more lift than standard rockers could give me due to a heavily worked engine with a supercharger on it.
Steve Simmons

This thread was discussed between 20/11/2015 and 22/11/2015

MG TD TF 1500 index

This thread is from the archive. The Live MG TD TF 1500 BBS is active now.