MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - SStuds length in TD headlamp bracket

Hello,

I plan to paint the headlamp brackets in body color. Now I want to put the studs permanently in the bracket, and to use nuts under the wings (fenders), as I think it was originally. I will cut some screws to the required length, but cannot take measurements, since the TD is garaged far from my home.

Can somebody tell me the protruding length of the studs from the headlamp bracket?

Thanks.

Jess
J Benajes

You want as little protrusion past the nut as possible. one or two turns extra,

I did the same thing. In my case the brackets had been drilled out by a PO who used hex headed bolts and nuts to secure them.

I re-tapped the brackets 3/8-24 LH and made special studs. I secured them with Loctite. I felt since I was tightening a RH nut the LH threads would only be made tighter.

Good Luck

Jim B.


JA Benjamin

Thanks Jim for the advice.

Until next weekend I won’t be able to measure the required stud length, this is why I asked for this value.

Jesus
J Benajes

This thread was discussed between 09/11/2015 and 10/11/2015

MG TD TF 1500 index

This thread is from the archive. The Live MG TD TF 1500 BBS is active now.