Welcome to our resource for MG Car Information.
MG TD TF 1500 - air in brake line
1954 mgtf: rebuilt brake cylinder: bleeding brake lines and keep getting bubbles: where do I look to find where the air is coming in? |
C. Eastman |
The air is not coming in, the air is trapped in the system, open all bleeder valves, keep the master cyl. full, put hoses into containers of brake fluid, let the system gravity bleed until a pint or so has been used. Tighten the bleeders, check the pedal,(make sure the brakes are adjusted) If pedal still pumps up, bleed system one bleeder at a time, a person in the driver seat using hard pedal pressure, & the mechanic, opening 1 bleeder FAST, & 90% or as much as the wrench will allow, then closing, still using a glass container to check for air bubbles. |
Len Fanelli |
Start at the right rear...left rear...right front...left front! |
gblawson(gordon) |
This thread was discussed between 02/08/2009 and 03/08/2009
MG TD TF 1500 index
This thread is from the archive. The Live MG TD TF 1500 BBS is active now.