MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - MGF Engine Access

Hi!

My MGF is becoming hard to start on wet mornings. The car has done 53000 miles and regularly serviced. This is something fairly recent which leads me to suspect dampness somewhere in the electrics.

In order to attack this problem I need access to the engine, and here lies my problem. How do I get any near the spark plugs. I've heard that there is access from under the rear parcel shelf. Is this correct? If so how do I get there?

Steve

It will probably be the leads - common problem on the MGF - get silicon replacements £50 approx - dont bother going to halfords etc - they dont do them!

Access under parcel shelf
see link for access

http://www.dotcomoff.demon.co.uk/

go to "MGF FAQS"

CLICK ON "DIY"

SELECT "ENGINE" and you will see "open engine compartment"
tony

Thanks,

Any idea who supplies the silicon leads?
Steve

The dealer in Bath - Harcliffe ?? or something like that
Although I think the better leads (silicon)are available from Mike saturn and other suppliers listed on the board mail order - links are all over the place here- not sure what the OEM rover replacements are like ?? Probably cheap n nasty but still cost £50 :)
Worth looking at all ignition parts while you have the engine access open - plugs etc!

This time of year (damp) always shows up the small faults on the ignition!


tony

Try B&G who advertise on this BBS.

Go for the sports rather than racing leads. They are easier to fit as the diameter is lower.
brianh

Directions on http://www.mgf.4mg.com/replace_sparkplugs.htm

Pretty straight forward- and show those 'Sport' leads to good effect :o)
Rob Bell

Steve

Any decent motor factor should be able to supply standard grade silicone leads for the F. Price will be around 25 instead of around 45 from Rover. Alternatively you could get performance magnecore leads from Brown & Gammons or Mike Satur for around 45.

Ralph
Ralph

NB: Watch out for the back of your hand while removing the engine cover bolts. Behind the T-Bar is a rather sharp metal edge which you can easily cut yourself on. Not sure if this is the case with MY2000 cars but be warned.
Tony Smith

Order a workshop manual from a Rover dealer. Part No. RCL0051 ENG (ENG stands for English).
Tony Smith

Sorry but if you can't work out how to get to the engine bay, buy yourself, what makes you think you will have any idea what to do when you eventualy get there.
umph

umph,

If you've got nothing helpful to say - don't bother.
Paul Lathwell

This thread was discussed between 14/10/2001 and 22/10/2001

MG MGF Technical index

This thread is from the archive. The Live MG MGF Technical BBS is active now.