MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - Another HGF

Sorry to bore you all with another HGF saga but (from those who know about these things)I would appreciate some clarification about "the upgrade kit".The car blew up in France end Sept on way back to UK.Car transported back to relatively local(for the sticks)ex-MG garage.I know these guys and they are very good.It turns out the water pump impeller had sheared off,no pumping of coolant,HGF.What a smell.But interestingly no overheating indication on the gauge and still coolant in the expansion bottle-dramatic steam effect though with lots of green stuff running out from under the car.I thought I'd run over Mr Spock(you know,Vulcan green blood ok forget that).Got VVC back(only done 38k) 850 lighter but car definitely runs better after head skim and valve lapping but question is -what exactly are the angled new dowels/rods in the upgrade kit? Ive done heads myself before Alpine/MGB,MGA,midget so am aware of the layout but don't see how dowels can be angled if the originals are vertical when the head comes off.So hows it done?
Also,the garage have given a years guarantee but with the upgraded fittings when can I next expect HGF? Problem is I normally take the car off the road for the winter so only do a very low mileage each year but this year its going to be used to see if it blews up early.I'm not paranoid,I'm not paranoid,I'm not paranoid.I wouldnt mind but this thing, a 97 import I've had since 10k 5 years ago, has had the ultimate in pampering tlc and this is how they repay you.

I was surprised to see on another posting that the imports have 2 rad fans (I have a/c) as opposed to a usual 1.

Rant over-any info would be welcomed.Mose
mose

Hi , the only "angled" in the new dowels is probably the slight chamfered (sp?) /coned ends. The steel ones replaces the older plastic type . The angles at the ends of the dowels are ment to make it easier to seat and mate them to the block and head.
BR / Carl.
Carl

Exactly as Carl says - the new dowels are steel rather than plastic. They're not angled (at least, not as I understand your use of the term).

Regarding the radiator fan count - all MGFs fitted with a/c have two radiator fans :o)

When can you next expect an HGF? Hopefully never, assuming that the garage you've used has done the job properly (and it sounds as though you trust them, so this shouldn't be an issue).

For peace of mind, you can do as many here have done - take out an AA waranty :o)
Rob Bell

Thanks guys.Its coming out again next week if the weather is dry.Mose
mose

This thread was discussed between 03/11/2005 and 05/11/2005

MG MGF Technical index

This thread is from the archive. The Live MG MGF Technical BBS is active now.