MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB Technical - Hidden Driving Lamps

I would like to fit front driving lights without changing the outwards appearance of the car. I appreciate B's always had a Lamp bar with spots and fogs on but I think they look too cluttered.

I am thinking of fitting a pair of very small modern driving lights (Xenon) behind the grill. They should minimise the restriction of air to the radiator. I have the stainless mesh grill not the standard versions. I assume as I don’t have the cooling fans hanging down anymore ( they are shrouded on each side of the rad’) I have the room.

Has anyone tried this? Would the grill badly effect the light pattern?

Regards

David
D M Tetlow

I think you might have problems at MOT time with them hidden behind a grill, testers don't even like headlamp stoneguards thesedays.

Neat idea though.
Mike BGT

David, if you put the light behind the grill, even mesh, you get a lot of light scatter which really degrades the effectiveness of the lights. How about something like I did on my midget, where I cut openings in the mesh just large enough to clear the lens. They show, but are about as hidden as you can make them.


Bill Young

A close up view.


Bill Young

Thanks Bill. Good idea.

Yours look very neat.

Dave
D M Tetlow

Here's what I did on my Midget:
http://www.geocities.com/fabfour@swbell.net/3.html
don g

sorry, looks like you have to cut and paste to include it all.
don g

In the UK SVC have a good range of lights aimed at Classics see http://www.s-v-c.co.uk/index.html The new Mini lights are smaller than most spots and can be bought from places like Car Builder Solutions (in Kent) in a chrome version or from SVC in stainless by Wipac. I have a pair I am in the process of fitting so no photo as yet but they suit the grille of the B/C etc better than larger ones I think.

Hope this is of use,
David B.
David Booker

Cheers Dave.

I have this idea that I would replace the idicator/side light units with the US all indicator version and have Angel Eye Spots in the grill.

But this would be getting away from the standard look I have been trying to get and I am not sure what the MOT chaps would do!!

Dave
D M Tetlow

Her's an arrangement I saw - looks good and can be easily reversed.
John


John Minchin

Cheers John.
That is probably the best I have seen yet as I don't want to cut the grill and also if the lights were behind the grill the over-riders mean the lights would be too central anyway.
Dave
D M Tetlow

Dave
Do you shop at Summit Motors?
I was on hols in UK in late 2006 and purchased some parts there on my way to Heathrow to fly home. The x-ray operator had to take a second look trying to work out what I had in my carry on bag!

John
John Minchin

This thread was discussed between 08/02/2008 and 11/02/2008

MG MGB Technical index

This thread is from the archive. The Live MG MGB Technical BBS is active now.