Welcome to our resource for MG Car Information.
MG MGB Technical - Frogeye Rear hanger
| Can anyone help with some advice on a problem I have with the rear hanger. The spring securing set bolts one has sheared off and the other has rounded off. |
| s haughton |
| Wrong forum. |
| Paul Hunt 2 |
| As Paul says, the 1/4 elliptical arrngement at the back of the frogeye was never used an a car badged with an octagon. I would imagine the key thing is that the spring boxes are in good shape |
| Stan Best |
| Stan, I'm pretty sure that the early MG midgets had both the octagon and the 1/4-liptics. S Haughton, Try the Midget Sprite Technical section. Probably plenty info there in the archives. Charley |
| C R Huff |
| I just checked in "Great Marques, MG" and that does say that the MKI Midget had 1/4 elliptics so yes there may be some help on the Midget board, however I think the Frog eye section of the AH site is the place to go as 1275 midgets with semi ellipticals are in the vast majority here. I did once see a Frogeye fitted with a mildly tuned 1.8 K series on the Frontline stand at Silverstone. I said to the salesman, let me make a guess, this car does not stil have it's original rear suspension? |
| Stan Best |
| The Midget/Sprite board is the place to go. There is quite a number of owners there with early Sprites and Midgets with 1/4 elliptic rear suspension. Including me :-) Tore |
| Tore |
| I have never thought about this before, the book mentions spring boxes with the locating bolt going through, this implies it's a free bolt rather than a set one, or are there fixed nuts on the spring boxes? Only an engineer would worry about this if it's not his car :-) |
| Stan Best |
This thread was discussed between 27/01/2008 and 28/01/2008
MG MGB Technical index
This thread is from the archive. The Live MG MGB Technical BBS is active now.