MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB GT V8 Factory Originals Technical - Weber hydraulic thowout bearing



Hello. Just looking for some info here. When you folks out ther bought your weber bearing did it
have the bleeder bolt included with the kit?

I purchased one last year and am just getting around to fitting it in now. I just realized that there is no bleeder. All I have are the lines
that need to be adapted to some useful workings.

Could some one let me know what you did to connect to the stock b master and what you used to bleed
out the system? (I have no bleeder screw but could just buy a bolt I suppose}

Thanks

Steve D
Steve Devine

Those hoses are your bleeder set-up. One of them should have a "bleder fitting" on the end of it. Get the unit installed in your car, which-ever hose is on the top side, put the fitting into that one. Connect the other to your master Cyl. Bleeding is simple. I used a home-made gunsons which pushed fluid fromt he Master Cyl to the slave. Took all of 2min to bleed her and be done.

Larry Embrey

This thread was discussed on 27/08/2002

MG MGB GT V8 Factory Originals Technical index

This thread is from the archive. The Live MG MGB GT V8 Factory Originals Technical BBS is active now.