Welcome to our resource for MG Car Information.
MG MGB GT V8 Factory Originals Technical - radiator worries
I have a very nice alloy rad lined up for my conversion the problem is i will have to turn it 90 degrees to get it to fit, so the water flows side to side.the outlets are on oppasite corners so ultimatly the water will flow top to bottom does anyone know if this will work? |
mark |
Crossflow rads are not unusual. I seem to recall that leter midgets went crossflow, so providing the capacity is adequate it should work. Dave |
Dave Wellings |
Might be a problem if it isn't baffled. The hot water will short circuit & flow across the top leaving cold water at the bottom. |
P.N. Sherman |
When you say opposite corners I assume you mean diagonally opposite. If so the flow will be fine. |
Paul Hunt |
This thread was discussed between 16/03/2004 and 18/03/2004
MG MGB GT V8 Factory Originals Technical index
This thread is from the archive. The Live MG MGB GT V8 Factory Originals Technical BBS is active now.