Welcome to our resource for MG Car Information.
MG MGB GT V8 Factory Originals Technical - Quad Carbs
Toying with the Idea of Quad 45 DRLA Carbs. I have a fibreglass Bonnet/hood so should be able to cut holes for air filters. I have read that this is the best carb setup for the 3.9 but alas its very expensive. Anyone with experience of this setup. Mark |
Mark |
Many moons ago. If you are building a race car, a great vintage setup. Not streetable at all. It's a setup built for running wide open. And, if you can find one, you'll pay. I've only seen a couple for sale in the past few years. Kelly |
Kelly Combes |
Mark, I've thought about this type of setup because the looks are wild. I would use the inclined Mogoletsi manifold with 4 TWM throttle bodies that incorporate separate injectors for each throat and run a programmable fuel injection computer to dial in the system. htat way you would have the look of four Webers and the smooth running and tunability of fuel injection. |
John Perkins |
This thread was discussed between 27/08/2003 and 28/08/2003
MG MGB GT V8 Factory Originals Technical index
This thread is from the archive. The Live MG MGB GT V8 Factory Originals Technical BBS is active now.