MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGA - Please help identify this crank pulley seal

I need to replace the pulley seal, and want to use the same type....
Thanks in advance
Edward


Edward Wesson 60MGA

Ed, no markings on it? If not, just pull it and measure up.
Art Pearse

I guess I am asking if this is a standard type seal on a 1600...I thought I would find a felt seal under the pulley.

There are markings on the seal, but nothing I've ever seen....
Any more ideas?
Edward
Edward Wesson 60MGA

To me, it looks a lot like a "B" cover...Is it?
Edward Wesson 60MGA

What about a 1622 cover?....

Edward Wesson 60MGA

http://mgaguru.com/mgtech/engine/cs100a.htm
http://mgaguru.com/mgtech/engine/cs201.htm
Barney Gaylord

Late MGA cover - standard MGA/MGB timing cover seal - looks like a later aftermarket seal with double lips rather than the original single lip - buy from any of the usual suspects.
Chris at Octarine Services

Thanks again , everyone.
....Looked closely at the numbers on the seal, and here's what I found:
Brand..."Tokez" (sounds Chinese or Indian)
Stamped size: 2.312-0.375 (must be the range of OD fits)
ID...1.562
So , evidently , this is a "late" cover....
I think I will order the GACO seal replacement, as I have had very good luck with this brand.
Edward

Edward Wesson 60MGA

This thread was discussed between 16/11/2013 and 17/11/2013

MG MGA index

This thread is from the archive. The Live MG MGA BBS is active now.