MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGA - Brake peddle/clutch peddle

As I am trying to clean things up I have been replacing the rubber cover over the brake and clutch peddle/clevis pin junction. I can't fit the pins over the hole on the peddle with the peddles already bolted in.

How should this be done?
R W Shaver

When I replaced mine the entire assembly was out of the car. Once the peddles are installed the rubber slips over top, then the mounting bracket sits on top of it. Once that is bolted down (with the exception of the bolts that hold the brake and clutch line clips) the master cyl. is installed and the peddles are connected to the M/C. Then install the last two bolt with the clips for the brake and clutch lines.
Hope this helps.
Kris
Kris Sorensen

I am trying to cut the corner and not take out the MC, so I will try again tonight. Just have to move the rubber toward the MC along the pins, then work the bolt back through the peddles. May work, may be too tight in there.
Rodger

This thread was discussed on 15/02/2005

MG MGA index

This thread is from the archive. The Live MG MGA BBS is active now.