Welcome to our resource for MG Car Information.
MG ZR ZS ZT Technical - Master Cylinder
Upon removing the brake / clutch master cylinder from my ZB Magnette, I observed the remains of additional grommetts located in the holes in the mounting bracket through which the push rods pass. There are listings for the push rod gaiters (have obtained new ones)but nothing is mentioned of any other grommetts to seal around the aforementioned holes. Can anybody offer any suggested replacements if, indeed, they originally existed. Secondly, I an considering welding the four mounting bolts onto the master cylinder bracket so that the complete bracket, with master cylinder in place, can be replaced as a complete unit. Any advise on this would also be appreciated. David Miles Brisbane, Australia |
D J Miles |
This thread was discussed on 26/05/2011
MG ZR ZS ZT Technical index
This thread is from the archive. The Live MG ZR ZS ZT Technical BBS is active now.