MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - Wire wheels

Hey everyone, I've got a set of wire wheels which I plan to fit to my midget but they are in need of shot blasting and powder coating....does anyone know of a reliable company either in yorkshire or notts and what price to expect?
I rang a couple of local firms today and they quoted 48 and 60 per wheel, seems a bit steep!

Thanks, James
J Rose

I would be very wary about second hand wire wheels especially ones that required treatment. Looking at the maths it must be almost as cheap to have bought new ones to begin with.

The problem with second hand wheels is the condition of the splines, sometimes these can be badly worn.
Robert (Bob) Midget Turbo

had mine done a little while ago for £10 a wheel..lightly blasted. I then painted them, as this was their original finish.
David Cox

I don't recommend powder coating wires. Two problems, the powder coat will prevent future adjustments of the spoke tension and as the spokes flex slightly at the rim and hub the powder coat cracks and rust can start. Once that happens it's a lot more difficult to remove the powder coat to repair. Paint is so much easier to touch up if necessary.
Bill Young

I think David's option is the best advice IF you want to retain the used wheels. No point on spending a fortune on unknowns.

Bob's advice is the more sensible way to go, but at about £90.00 per wheel for new ones, I can see your logic in refurbished s/h ones.

Mark.
M T Boldry

This thread was discussed between 19/05/2009 and 20/05/2009

MG Midget and Sprite Technical index

This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.