Welcome to our resource for MG Car Information.
MG Midget and Sprite Technical - Steering box
My son noticed that the steering box on our Bugeye slides from side to side when the steering wheel is turned. It moves just a small amount, maybe 1/16". Should there be shims in place where the steering box is held in place by the mounting brackets? I don't think I've seen anything in the catalogues. |
tim |
Tim, Some catalogues do show shims, I've used masking tape to good effect for this purpose. IIRC a wrap or 2 as necessary and make sure you don't do the bolts up to tight as the brackets are easy to break as many, including myself, know from experience. |
David Billington |
Strictly speaking Tim it's a steering rack - a steering box is entirely different. As David's said, the problem is relatively easily solved - a wrap of thinnest gasket paper - or masking tape, around the rack where it's clamped will sort you out. I failed MoT on that exactly that issue earlier this year. |
Steve Clark |
Thanks for the feed back. I do recall paper 'shims' being necessary. Should be an easy fix. Steve, appreciate you setting me 'straight'. Steering rack it is. Cheers |
tim |
This thread was discussed between 15/07/2008 and 16/07/2008
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.