Welcome to our resource for MG Car Information.
MG Midget and Sprite Technical - Minisport manifold
| Anyone tried fitting a Minisport manifold/HIF44 on a 1275? |
| G Williams (Graeme) |
| So that looks like a "no" then! |
| G Williams (Graeme) |
| Hi Graeme, I haven't but I'm sure this has come up before. Something to get you started... http://www.british-cars.org/mg-midget-sprite-technical-bbs/hif44-201107071453066366.htm http://www.british-cars.net/mg-midget-sprite-technical-bbs/hif44-problems-2008041217025510557.htm Cheers, Malcolm |
| Malcolm Le Chevalier |
| Graeme I had a Minisport and a Titan so I set up a series of angle/distance checks in the workshop to compare both of them against the original 1 1/4's and posted on the bbs - but as usual I can't find it now !! The Minisport was higher and I seem to remember it would have hit the bonnet if other measures were not take. Its worth watching evil bay as they do regularly come up. I've an HIF6 on a Titan with deep K&N + short ram pipe inside and its well worth the effort of fitting. R. |
| richard boobier |
| Graeme. My HIF44 is on a Minisport manifold on my 1098 engine which has a shorter block than a 1275 and I had to have it chamfered at the head end to make it "lean back" enough to clear the bonnet. Bernie. |
| b higginson |
| Graeme, http://www.ebay.co.uk/itm/Titan-Motorsport-Inlet-Manifold-Single-Carb-Conversion-MG-Midget-Healey-Sprite-/281065951566?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4170d6114e Titan manifold for a MG Midget. |
| R Williams |
| The chap on ebay regularly sells refurb Titans and also builds them up into complete kits with refurb HIF44. |
| G Williams (Graeme) |
This thread was discussed between 15/02/2013 and 17/02/2013
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.