Welcome to our resource for MG Car Information.
MG Midget and Sprite Technical - Hardtopclip
| The new hardtopclip that I collected 5 years ago at Angelo’s is to short. I am looking for a longer one. Any ideas are welcome. Flip ![]() |
| Flip Brühl 948 frog 59 |
| It looks like the correct one. What hard top have you got? Nice screensaver by the way. |
| Same old Gary |
| On my hard top it uses the same clips as on the soft top, which dont look anything like those...mine is a 71 mg midget, might be able to look them up in moss or victoria britsh to get a better Idea of what they look like. prop |
| Prop |
| It is a Healey hardtop as you can see the windows dont close, where can I order the right windows? Flip ![]() |
| Flip Brühl 948 frog 59 |
| Windows dont close Flip ![]() |
| Flip Brühl 948 frog 59 |
| Sorry to interrupt your thread Flip but i just wanted to let you know(perhaps youve already knew) about the 5th spridgetrun organised by the Dutch AH Sprite club on the 1st of june. If you didnt already knew and want more info let me know. |
| Arie de Best |
| I don't know but is there any chance that the clip should go on the outside of the framem next to the glass Cheers Carl |
| C Bintcliffe |
| I have just had a look at all of my photos and as far as I can make out your clip is correct. It looks like you just need to get the hardtop to sit lower down, then your clip will fit and you will no longer have the gap to the windows. Hope this helps Carl |
| C Bintcliffe |
| No. I think that the Healey works top had a special window. I quote from Terry Horler's book. Pages 45 & 46 also showing the different sized screens on page 48. "The Healey Hardtop predated the BMC item, which shared the same styling. The Healey hardtop, however used deeper sidescreens. Each hardtop was numbered and identified by a plate in the right door window ledge. The highest number known is 190, but there may have been many more". I hope that clarifies things. The thing to do is measure your existing (BMC) sidecreens and whenever they come up for sale on ebay or the like, contact the seller and ask them to measure the height of theirs. If they are taller than your existing ones then they may well be the screens that you need. |
| Same old Gary |
| Thank you gentlemen, I will ovalise the existing holes in the hardtop an start looking on e Bay Flip |
| Flip Brühl 948 frog 59 |
| Flip, you will still need to find a pair of the very scarce 1" taller side screens..... Perhaps another post on here may help trace some. I don't think I have seen many sets. Mark. |
| Mark Boldry |
| I have one of the tall screens. A set could be fabricated from a couple of sets of standard screens, but the top front corner will be difficult, as it is rounded rather than angular as in the standard screens. - Bill |
| Bill Gavin |
| Bill, I wonder how high your screen is, and can you uload a picture? Flip ![]() |
| Flip Brühl 948 frog 59 |
| Hi Flip I measure the height of the tall screen at 11" - Bill ![]() |
| Bill Gavin |
Here's another shot, showing the tall screen and a standard screen. You can see the difference in height, as well as the different shape.
![]() |
| Bill Gavin |
| Yeah! I can clearly see the difference now. Do you sell it? flip.bruhl@quicknet.nl Flip |
| Flip Brühl 948 frog 59 |
| Flip - Yours is very definitely NOT the high-sidescreen hardtop. As Carl has said, you need to get the top to sit lower on the car: the rubber sealing strips you are using over the windscreen and at the back are too thick. What is sold now as the 'correct' rubber trim for hardtops is not necessarily what was fitted originally. In any case, some of the period hardtop seals needed to be compressed with stupidly high pressures before they would seat properly - thereby damaging the hardtops through stress cracks. None of this hassle is now required since the development of closed-cell foam strip, which does not absorb water and can be compressed easily to provide a good seal. This is from the Baines catalogue: http://catalogues.kellysearch.com/catalogue_page.asp?ck=83024491&cn=1&pg=103&pn= I use similar stuff which I got from the Woolies stand at a classic car show - but it's also available by mail order: www.woolies-trim.co.uk. Tom |
| Tom Coulthard |
This thread was discussed between 01/02/2008 and 10/02/2008
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.