MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - Frogeye Brake / Cltch pipe layout

Does anyone have a photo of the correct layout of the Frogeye brake and clutch pipes around the master cylinder and up to the 4 way brake connector ?
John M Platt

Having just rerouted my 1500 lines I found it very difficult bordering on confusing to find coherent info. Best to just find an original car and take a photo. I changed the routing on mine to decrease the pipe runs and get rid of the unnnecessary (to me) brake failure pressure switch, which yours doesn't have ( a blessing). Get a brake bending tool and use the cupro tube, much easier to bend (FYI this tube is illegal in OZ have to use steel)


Cheers and good luck
R W Bowers

John
These might help
Ed


Ed H

This thread was discussed between 08/09/2012 and 10/09/2012

MG Midget and Sprite Technical index

This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.