MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - Diff cage bearing removal

I am attempting to adjust the backlash of a 4.2 Sprite diff that I am installing. The cage bearings were marginal so when I managed to remove them it was not too tragic when they fell apart during the process. But now I intend to juggle the shims to achieve the proper backlash number and if I am NOT successful I would like to understand how to remove said bearings without damaging them. It appears that a very specific puller is needed to get under the bearing and seat on the inner race. Even with some of the ring gear bolts removed it looks like a tight fit. I'm in the US and would prefer not to get some specialzed tool for perhaps a one time operation. HELP!
j bassler

Theres two small indents under the bearings, just grind down a puller to suit.
Brad 1380

I hope this is helpful (from the library over at the MG Experience):

http://www.mgexperience.net/article/mg-midget-differential-rebuild.html

the bearing puller shown used to remove the inner pinion bearing is the same that would be used to pull the cage bearings. I bought a puller set from Harbor Freight for about $50, and most auto parts stores will rent one.

Norm
Norm Kerr

This thread was discussed on 03/04/2011

MG Midget and Sprite Technical index

This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.