MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - Can I leave the bypass hose closed?

When I got my 948 frogeye the bypass hose missed. The water pump and the cylinder head are closed. Will it do any harm to the motor or head?
Flip
Flip Brühl 948 frog 59

Flip. I have not done this myself. However, when I owned a 61 Sprite Mark II, back in the late 60's, this was a commonly recommended modification. After having to connect the bypass hose, and attach clamps, while trying to install the cylinder head I understood why so many people blocked off the passages. None of the people that I knew ever had a problem with that modification.

Les
Les Bengtson

.....and thousands of 1.3 Metros never had a problem that I'm aware of.

Not as a result of lack of by-pass hose, I mean....
8^)
Steve Clark

Although Metros bypass via the second half of the two piece stat housing ISTR

My midget WITH Metro head and water pump (no bypass on either) is quite happy not bypassing...

I did, as advised after I'd fitted it, take the 'stat out and drill a " hole in the main plate. But even before I did it was perfectly OK.
Bill sdgpm

Thank You I 'll leave it closed. ( And leave a bypasshose there for originality)

Flip
Flip Brühl 948 frog 59

just did the first 400km on my new engine without bypass but i have drilled 2 8mm holes in the thermostat (witch is a bit mutch keep it to 1 that is fine)
Onno Könemann

This thread was discussed between 15/05/2009 and 17/05/2009

MG Midget and Sprite Technical index

This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.