Welcome to our resource for MG Car Information.
MG Midget and Sprite Technical - Brake hoses?
| Hi, I'm want to renew my old rubber brake hoses to stainles braided ones. There seems to be so much choice for a 1500 midget, ranging from £20-£50 all with different part numbers, but all are supoposedly Goodridge. Is there any difference in quality with the cheaper ones to the more expensive? Any suggestions, I just want to get a good set for me money? Thanks Kevin |
| K Grice |
| Kevin, the only difference I could think of is they type of fittings on the ends. The AN fittings can be either aluminium, steel, or stainless steel. The best for brake applications is the stainless steel as they won't corrode and cause problems later. The hose is pretty standard, a teflon liner surrounded by a brainded stainless steel cover to both reinforce the inner hose and provide abrasion resistance. Part of the price difference might be in the style of fitting, some would be normal AN which would require an adaptor to your existing brake lines, others may have the correct style fitting and screw directly into the existing lines. Either way IMHO it's one of the best upgrades you can give your car. Better pedal feel and no worries about flex hoses for the life of your car. |
| Bill Young |
| Bill, I agree. An excellent, almost essential upgrade. However I am less convinced by your final statement "no worries for the life of your car" I believe that these things do have a finite life. There have certainly been tales about failure of SS braided hoses and I think that they must deteriorate with time. Part of the difficulty of course is that the braiding prevents effective visual inspection. I would say that being such an essential safety item they should be replaced periodically, although I couldn't say how often that is. It must depend on useage. That said, mine have done 50,000 miles. I think I have just convinced myself of the next job on my list! Guy |
| Guy Weller |
| Thanks guys, I just want to make sure that I get the right kit and not need to get any add on fittings later. Kevin |
| K Grice |
| Guy, I agree, anything will require some maintenance at some time, but in my experience this stuff is as close as I've found to "eternal". The only failures I've heard of is from failures where the fittings are fitted to the hose and those are rare. I make up my own hoses using the screw together fittings and haven't had any problems over the years if assembled correctly. I've used this stuff for both brake lines on my cars and high pressure ammonia lines at work and even in the ammonia environment there's no problems. |
| Bill Young |
| Thanks, Have ordered the hoses today. Cheers |
| K Grice |
This thread was discussed between 31/01/2008 and 01/02/2008
MG Midget and Sprite Technical index
This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.