MG-Cars.net

Welcome to our resource for MG Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG Midget and Sprite Technical - Armature sundries

I could buy a NOS C 40 dynamo armature for my toasted one on E-bay. It was toasted for several reasons:
Corroded screw connector on the control box
Bigger demand (headlamp relays and 2,5 mm2 wiring)
High RPM during hours
Lat but not least, the open ring on the pulley side of the armature was gone (photo). I suppose that too much torque on the pulley nut forced the open ring out of its grove. So the armature scuffled against the dynamo and several wirings were interrupted.

Question:
Is the open ring in the armature enough to withstand the torque of the pulley nut? Or do I need another closed ring over the open one to prevent it to be pushed out of its groove?

Flip


Flip Brühl 948 frog 59

This thread was discussed on 29/07/2010

MG Midget and Sprite Technical index

This thread is from the archive. The Live MG Midget and Sprite Technical BBS is active now.